6. If the server is installed in a rack, reinstall the server into the rack.
7. Power on the server and any peripheral devices.
Install the chassis air baffle
Use this procedure to install the chassis air baffle.
Before installing the chassis air baffle:
1. Read the safety information and installation guidelines (see "Safety" on page iii and "Installation
Guidelines" on page 58).
To install the chassis air baffle, complete the following steps:
Figure 83. Chassis air baffle installation
Step 1.
Align the chassis air baffle with the slots on both sides of the chassis, and lower it into the server.
Step 2.
Slightly press the chassis air baffle, make sure it is fully secured.
After installing the fan cage assembly, complete the following steps:
1. Install the top cover (see "Install the top cover" on page 97).
2. If the server is installed in a rack, reinstall the server into the rack.
3. Power on the server and any peripheral devices.
Install the PCIe expansion tray
Use this procedure to install the PCIe expansion tray.
Before installing a PCIe expansion tray:
1. Read the safety information and installation guidelines (see "Safety" on page iii and "Installation
Guidelines" on page 58).
.
Chapter 3
Server hardware setup
93