Lenovo ThinkSystem SR860 Setup Manual page 104
Hide thumbs
Also See for ThinkSystem SR860:
- Maintenance manual (212 pages) ,
- Setup manual (172 pages) ,
- Product manual (65 pages)
Table of Contents
Advertisement
Figure 86. 4U PCIe riser assembly installation
Step 2.
Reinstall the PCIe expansion tray (see "Install the PCIe expansion tray" on page 93) and remove the
4U PCIe riser assembly fillers if any are installed.
Step 3.
Align the 4U PCIe riser assembly with the rear chassis and the guide pins on the side of the PCIe
expansion tray; then, insert the 4U PCIe riser assembly into the slot.
Step 4.
Rotate the lever downward until it clicks. Make sure the 4U PCIe riser assembly is fully seated into
the PCIe expansion tray.
96
ThinkSystem SR860 Setup Guide
Advertisement
Table of Contents
