Remove A 4U Pcie Riser Assembly - Lenovo ThinkSystem SR860 Setup Manual
Hide thumbs
Also See for ThinkSystem SR860:
- Maintenance manual (212 pages) ,
- Setup manual (172 pages) ,
- Product manual (65 pages)
Table of Contents
Advertisement
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Remove a 4U PCIe riser assembly
Use this procedure to remove a 4U PCIe riser assembly.
Before removing a 4U PCIe riser assembly:
1. Read the safety information and installation guidelines (see "Safety" on page iii and "Installation
Guidelines" on page 58).
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables (see
"Power off the server" on page 101).
3. If the server is installed in a rack, remove the server from the rack.
4. Remove the top cover (see "Remove the top cover" on page 61).
To remove a 4U PCIe riser assembly, complete the following steps:
Figure 48. 4U PCIe riser assembly removal
Step 1.
Open the release latch.
Step 2.
Rotate the lever to disengage the 4U PCIe riser assembly from the slot.
.
Chapter 3
Server hardware setup
63
Advertisement
Table of Contents
