Table of Contents
Advertisement
talker. If the board is the Active Controller, it unasserts ATN in order to send data. This routine
leaves the board in that state.
If you want to send an EOS character at the end of the data string, you must include it in the
string.
Example
This example sends five bytes terminated by a carriage return and line feed to the specified
device.
C
GPIB-488
int ptr;
ptr = ibdev (0,7,0,13,1,0);
ibwrt (ptr,"IP2X5\r\n", 7);
3-57
Chapter 3
GPIB 488.1 Library Reference
Programming Reference Manual
Advertisement
Table of Contents
