Table of Contents
Advertisement
Appendix C
IBERR
Error Code
Decimal
Mnemonic
11
ECAP
12
EFSO
14
EBUS
15
ESTB
16
ESRQ
20
ETAB
23
EHDL
Cause:
Solution:
Cause:
Solution:
Programming Reference Manual
Table C-1. Error codes (Continued)
No capability for intended operation
File system operation error
Command error during device call
Serial poll status byte lost
SRQ remains asserted
The return buffer is full.
The input handle is invalid
EDVR—Driver error
A board or device is not installed or configured properly. This error
is returned when a device or board that is passed to
be found, or when a board index passed to
will contain an error code to help further identify the
Ibcnt
problem.
•
Call
name.
•
Configure each board and device.
•
Include the unit descriptor that is returned from
or
the value of the variable before the failing function is not
corrupted.
ECIC—Specified GPIB interface board is not CIC
Many routines require that the GPIB interface board is the
Controller-In-Charge. These include:
, for example, as well as any routines which manipulate the
Receive
GPIB ATN, EOI, or REN lines.
Make sure that the GPIB interface board is the Controller-In-Charge.
Description
to open a device without using its symbolic
ibdev
as the first parameter in the function. Verify that
ibdev
C-2
ibfind
cannot be found.
ibdev
,
,
,
ibcmd
ibln
ibrpp
cannot
ibfind
,
Send
GPIB-488
Advertisement
Table of Contents
