Table of Contents
Advertisement
Returns
will contain a 16-bit status word as described in Appendix B, IBSTA.
Ibsta
will contain an error code, if an error occurred. If no error occurred, the previous
Iberr
setting of the configured item is returned in
Usage Notes
None.
Example
This example illustrates how to change the timeout value for GPIB Interface Board 1 to 300
msec.
C
GPIB-488
Iberr
int device;
device = ibfind ("gpib1");
ibconfig (device, IbcTMO, 10);
3-15
Chapter 3
GPIB 488.1 Library Reference
.
Programming Reference Manual
Advertisement
Table of Contents
