Table of Contents
Advertisement
If this call defines an EOS for a device, then the defined EOS is used for all reads and writes
involving that device. Likewise, if the call defines an EOS for a board, then all reads and
writes involving that board will use that EOS.
This call remains in effect until one of the following occurs:
•
Another
•
or
ibonl
•
The system is re-started.
Example
This example configures the GPIB system to send the END message whenever the line feed
character is sent to a particular device. Method B described in Table 3-4,
used (
).
XEOS
C
GPIB-488
call is made.
ibeos
is called.
ibfind
int device;
ibeos (device, XEOS + '\n');
Chapter 3
3-21
GPIB 488.1 Library Reference
Selecting
EOS, is
Programming Reference Manual
Advertisement
Table of Contents
