Starter Clutch Removal & Installation - Honda XLR200R Service Manual

STARTING MECHANISM, STARTER CLUTCH
STARTER CLUTCH REMOVAL & INSTA, L LATION
Removal
Remove flywheel. 1"'14-8)
Remove starter driven gear by turning counter-clockwise.
Hold the flywheel using flywheel holder. then remove one-
way,clutch torque bolt.
Fly Wheel Holder
Torque Bit
07725-0040000
07703-0010100
Remove one-way clutch outer, one way clutch.
Installation
Wash one-way clutch, apply clean engine oil into one-way
clutch retainer
Face one-way clutch flange side
to
flywheel, then attach one-
way clutch outer.
Attach one-way clutch assy. to flywheel.
Starter Driver Gear
Flywheel
Torque Bolt
Flywheel Holder
One-way Clutch Outer
One-way Clutch Retain.er
~_/
Flywheel
~~
Torque Bolts , /
16-11