Honda XLR200R Service Manual page 123

REAR WHEEl, SUSPENSION
A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean contaminated disc
with
a
high quality degreooing agent .
• Support frame adequately using jack, raise rear wheel before operating.
• After installation, adjust drive chain slack.
WORK / PART NAME NO. NOT E S
Removal Installation is reverse order of removql.
(1 )
Brake Adjuster
1
(2)
Brake Arm Pin
1
(3)
Brake Rod 1
(4)
S;pring
1
(5) Rear Axle Nut 1
Loosen axle nut, loosen chain adjuster completely, remove
chain from driven sprocket.
(6) Washer
1
(7)
Left Chain Adjuster 1
(8) Rear Axle 1
(9) Stopper Plate
1 Align plate hole to swing arm stopper pin when installing.
(10) Right Chain Adjuster 1
(11 )
Rear 'Nheel
1
Dismantling/Assembly (~12-4)
(12) Rear Wheel Collar 1
(13) Brake Drum.
1 Align drum groove and swing arm boss when installing.
12-3