Honda XLR200R Service Manual page 78

Attach cam shaft to.cYlinder head.
• Attach cam shaft groQvefacing upwards.
• Attach the cam ~haft so that its bolt hole is vertical
relative to cylinder head surface.
Install cylinder head cover (Q7-6). Tighten the nuts and bolts
to specified torque.
Torque: Cylinder Head Cover Nut : 2.7 kg-m
Cylinder Head Cover Bolt: 1.2 kg-m
Put cam chain onto cam sprocket.
While aligning t~e cam sprocket index mark to the cylinder
head cover, attach cam sprocket to the cam shaft.
Attach cam sprocket bolt and tighten to the specified torque.
Torque: 1.2 kg-m
S(\
)
Che.ck that the cam sprocket index mark is aligned with the
cylinder head cover when the flyweel "T" mark is also aligned
with the notch on left crankcase cover. Adjust valve clearance
(Q3-10).
CYLINDER HEAD, VALVE
Cam Groove
Bolts
Cam Sprocket Bolt
.-~
--c
~
________ -
Cam Sprocket
7-9