Configuring Inter Class Policer Bucket Sharing: Example - Cisco ASR 9000 Series Configuration Manual

Configuring Modular QoS Service Packet Classification

Configuring Inter Class Policer Bucket Sharing: Example

In this example, policer bucket policy1 is defined and shared by class class1. The shared policer bucket policy1
is referred by class class2.
configure
class-map class1
match precedence 5
!
class-map class2
match precedence 1
!
policy-map parent
class class1
class class2
end-policy-map
!
Additional References
These sections provide references related to implementing packet classification.
Related Documents
Related Topic
Initial system bootup and configuration
Master command reference
QoS commands
User groups and task IDs
Targets (applied as child policy):
Total targets: 0
police bucket shared policy1 rate 2 mbps
police bucket referred policy1
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release 6.1.x
Configuring Inter Class Policer Bucket Sharing: Example
Document Title
Cisco ASR 9000 Series Aggregation Services Router Getting
Started Guide
Cisco ASR 9000 Series Aggregation Services Router Master
Command Listing
Cisco ASR 9000 Series Aggregation Services Router
Modular Quality of Service Command Reference
"Configuring AAA Services on Cisco ASR 9000 Series
Router" module of Cisco Cisco ASR 9000 Series
Aggregation Services Router System Security Configuration
Guide
177