Cisco ASR 9000 Series Configuration Manual page 265

Configuring Flow Aware QoS
Command or Action
Step 11
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap-c-police)#
exit
Step 12
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# exit
Step 13 class class-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
video
Step 14 set dscptunnel-value
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# set
dscp af41
Step 15
admit cac local
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# set
dscp af41
Step 16 flow idle-timeout value
Example:
RP/0/RSP0/CPU0:router(config-pmap-c-cac)#
flow idle-timeout 20
Step 17
flow rate value
Example:
RP/0/RSP0/CPU0:router(config-pmap-c-cac)#
flow rate 128
Step 18 rate rate
Example:
RP/0/RSP0/CPU0:router(config-pmap-c-cac)#
rate 896 kbps
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release 6.1.x
Configuring Flow Aware CAC Reject Action
Purpose
Returns the router to policy map class configuration mode.
Returns the router to policy map configuration mode.
Specifies the name of the class whose policy you want to
create or change.
Sets the IP differentiated services code point (DSCP) in the
type of service (ToS) byte to AF41.
Configures the call admission control (CAC) local flow type
and enters the policy map class cac configuration sub-mode.
Configures the maximum time of inactivity for the flow as
20 seconds.
Configures the per flow rate for the flow as 128 kbps.
Configures the per flow rate for the flow as 896 kbps.
249