Sip 700 For The Asr 9000 - Cisco ASR 9000 Series Configuration Manual

Configuring the Three-Parameter Scheduler
Command or Action

SIP 700 for the ASR 9000

SUMMARY STEPS
1. configure
2. policy-map policy-name
3. class class-name
4. bandwidth {rate [units] | percent percentage-value} or bandwidth remaining [percent percentage-value
| ratio ratio-value] or shape average {percent percentage | rate [units]}
5. exit
6. policy-map policy-name
7. class class-default
8. shape average {percent percentage | rate [units]}
9. service-policy policy-map-name
10. end
11. or commit
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release
6.1.x
210
Purpose
Entering no exits the configuration session and returns the
router to EXEC mode without committing the configuration
changes.
Entering cancel leaves the router in the current configuration
session without exiting or committing the configuration
changes.
• Use the commit command to save the configuration changes
to the running configuration file and remain within the
configuration session.
Purpose
Enters global configuration mode.
Configuring Hierarchical Modular QoS