Attaching Hierarchical Policies To Physical And Virtual Links - Cisco ASR 9000 Series Configuration Manual

Attaching Hierarchical Policies to Physical and Virtual Links

Command or Action
Step 9
service-policy policy-map-name
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)#
service-policy Bottom-Child
Step 10
end
Step 11 or commit
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# end
or
RP/0/RSP0/CPU0:router(config-pmap-c)# commit
Attaching Hierarchical Policies to Physical and Virtual Links
To attach hierarchical policies to interfaces, subinterfaces, virtual circuits, and virtual LANs, use the
service-policy {input | output} policy-map-name command.
SUMMARY STEPS
1. configure
2. interface type interface-path-id
3. service-policy {input | output} policy-map-name
4. end
5. or commit
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release
6.1.x
212
Purpose
Applies a bottom-level policy to the top-level class-default class.
Saves configuration changes.
• When you issue the end command, the system prompts you
to commit changes:
Uncommitted changes found, commit them before exiting
(yes/no/cancel)? [cancel]:
Entering yes saves configuration changes to the running
configuration file, exits the configuration session, and
returns the router to EXEC mode.
Entering no exits the configuration session and returns the
router to EXEC mode without committing the configuration
changes.
Entering cancel leaves the router in the current configuration
session without exiting or committing the configuration
changes.
• Use the commit command to save the configuration changes
to the running configuration file and remain within the
configuration session.
Configuring Hierarchical Modular QoS