Cisco Asr 9000 Series Aggregation Services Router Modular Quality Of Service Configuration Guide, Release - Cisco ASR 9000 Series Configuration Manual

Configuring Modular QoS Congestion Management
Command or Action
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)#
bandwidth remaining percent 80
Step 10 exit
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# exit
Step 11
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap)# exit
Step 12
interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# interface
POS 0/2/0/0
Step 13 service-policy {input | output} policy-map
Example:
RP/0/RSP0/CPU0:router(config-if)#
service-policy output policy1
Step 14 commit
Step 15 show policy-map interface type interface-path-id
[input | output]
Example:
RP/0/RSP0/CPU0:router# show policy-map
interface POS 0/2/0/0
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release 6.1.x
Configuring Guaranteed and Remaining Bandwidths
Purpose
The remaining bandwidth of 40 percent is shared by
Note
class class1 and class2 (see Steps 8 and 9) in a 20:80
ratio: class class1 receives 20 percent of the 40 percent,
and class class2 receives 80 percent of the 40 percent.
Returns the router to policy map configuration mode.
Returns the router to global configuration mode.
Enters interface configuration mode and configures an interface.
Attaches a policy map to an input or output interface to be used
as the service policy for that interface. In this example, the traffic
policy evaluates all traffic leaving that interface.
(Optional) Displays policy configuration information for all
classes configured for all service policies on the specified
interface.
71