Offloading Service-Policy On Physical Satellite Fabric Link - Cisco ASR 9000 Series Configuration Manual

Aggregation services router modular quality of service
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Configuring QoS on the Satellite System
Command or Action
Step 13
nv
Example:
RP/0/RSP0/CPU0:router(config-if)# nv
Step 14
service-policy input policy-map
Example:
RP/0/RSP0/CPU0:router(config-if-nV)#
service-policy input policy2
Step 15
commit
Step 16
exit
Example:
RP/0/RSP0/CPU0:router(config-if)# exit
Step 17
commit

Offloading Service-policy on Physical Satellite Fabric Link

Perform these tasks to offload the service-policy on the physical Satellite Fabric Link (SFL). This procedure
offloads the service-policy in the egress direction of SFL.
SUMMARY STEPS
1. configure
2. class-map [type qos] [match-any] [match-all] class-map-name
3. match qos-group [qos-group-value]
4. end-class-map
5. policy-map [ type qos ] policy-name
6. class class-name
7. bandwidth {bandwidth [units] | percent value}
8. exit
9. end-policy-map
10. interface type interface-path-id
11. nv
12. satellite-fabric-link satellite satellite_id
13. remote-ports interface_type remote_subslot
14. service-policy output policy-map
15. commit
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release 6.1.x
Offloading Service-policy on Physical Satellite Fabric Link
Purpose
Enters the satellite network virtualization (nV) configuration
submode.
Attaches a policy map to an input interface to be used as
the service policy for that interface.
Returns the router to global configuration mode.
287

Advertisement

Table of Contents
loading

Table of Contents