Cisco Asr 9000 Series Aggregation Services Router Modular Quality Of Service Configuration Guide, Release - Cisco ASR 9000 Series Configuration Manual

Mapping AN Ports to VLAN Subinterfaces
Command or Action
Step 4 show ancp an-port {circuit-id Access-Loop-Circuit-ID |
interface type interface-path-id | interface
Bundle-Ether bundle-id | mapping} [statistics | detail]
Example:
RP/0/RSP0/CPU0:router# show ancp an-port
gigabitethernet 2/0/1/1.1
Step 5 show ancp an-port [configured | dynamic-only][statistics]
Example:
RP/0/RSP0/CPU0:router# show ancp an-port
configured
Step 6 show ancp an-port summary [statistics][detail]
Example:
RP/0/RSP0/CPU0:router# show ancp an-port summary
Step 7
clear ancp an-port {all | circuit-id Access-Loop-Circuit-Id
| interface type interface-path-id | interface
Bundle-Ether bundle-id | neighbor {description string
| sender-name {H.H.H | A.B.C.D}}[statistics]
Example:
RP/0/RSP0/CPU0:router# clear ancp an-port all
Step 8 show ancp an-port {description description-string |
sender-name {H.H.H | A.B.C.D}}
Example:
RP/0/RSP0/CPU0:router# show ancp an-port
description vendor3b
Step 9 show ancp an-port state [up | down | none] [statistics]
Example:
RP/0/RSP0/CPU0:router# show ancp an-port state
up

Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release

6.1.x
22
Configuring Access Node Control Protocol
Purpose
Entering cancel leaves the router in the current
configuration session without exiting or committing the
configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain within
the configuration session.
(Optional) Displays information about the association of
DSLAM access ports (or CPE clients of a DSLAM) with VLAN
subinterfaces.
(Optional) Displays summary data or statistics for AN ports that
are or are not mapped to interfaces.
(Optional) Displays port counts by state.
(Optional) Clears AN ports of dynamic data or statistics either
individually or in groups. Published information is cleared and
information learned from the DSLAM is cleared.
(Optional) Displays AN port information.
(Optional) Displays AN port state information.