Ups System Input; Ups System Output - Eaton 93PM User And Installation Manual

Eaton 93PM UPS 30–200 kVA
9.2
Rated input voltage
Voltage tolerance (Rectifier input)
Voltage tolerance (Bypass input)
Rated input frequency
Frequency tolerance
Number of input phases (rectifier & bypass) 3 phases, + N
Input power factor
Rated/maximum mains input current
Input current distortion at rated input cur-
rent, iTHD
Rectifier ramp-up, rectifier start and load
step
Backfeed protection
9.3
Table 23: Eaton 93PM 30–200 kW UPS system output
Number of output phases
Rated output voltage
Rated output frequency
Total voltage harmonic distortion:
100 % linear load
100 % non-linear load
Rated output frequency
Output frequency variation
Slew rate
Output current
Overload capability at
ambient 40 °C
(on inverter)
©
Eaton Corporation plc 2017. All rights reserved.

UPS system input

UPS system output

220/380 V; 230/400 V; 240/415 V
230 V -20% / +20%
230 V -15% / +10%
50 or 60 Hz, user configurable
40 to 72 Hz
0.99
9
See Tables
30 kW: < 4,5%
40–200 kW, 60 kVA: < 3%
10 A/s (default), configurable.
Min 1 A/s
Yes, for rectifier and bypass lines
3 phases + N
220/380 V; 230/400 V;
240/415 V; configurable
50 or 60 Hz, user
configurable
< 1%
< 3%
50 Hz or 60 Hz, configurable
±0.1 Hz
0.4 Hz/s
8
See Table
10 min 102–110% load
60 s 111–125% load
10 s 126–150% load
300 ms > 150% load
Revision: 005 Document ID: P-164000249
User's and installation guide
11
and
10
and Table
112 (126)