Software And Connectivity Features; User Interface; Power Management Software; Options And Accessories - Eaton 93PM User And Installation Manual

Eaton 93PM UPS 30–200 kVA
separate generator sets, or situation where the bypass sources for the two
systems are lost.
3.4
3.4.1
MiniSlot Communication Bays — there are 3 communication bays for MiniSlot
connectivity cards. MiniSlot cards are quickly installed and hot-pluggable. See
Chapter
3.4.2
Intelligent Power software products offer tools for monitoring and managing
power devices across the network. See Chapter
3.5
Contact your Eaton sales representative for more information about the
available options and accessories.
3.5.1
The Maintenance Bypass Switch (MBS) enables power to completely bypass
and isolate the UPS so that the UPS can be safely serviced or replaced without
interrupting power to critical systems.
An internal maintenance bypass switch is provided as a factory installed option
for 30–150 kW units.
Alternatively, MBS solutions are also available in an external enclosure as
accessory items.
External Maintenance Bypass Switch Panel
The external MBS is enclosed in its own separate cabinet, which can be either a
wall-mounted or stand-alone cabinet depending on the MBS power rating. The
MBS includes a Maintenance Bypass Switch (MBS) and a UPS Output
Maintenance Isolation Switch (MIS). The panel may additionally include one or
two input breakers: one for the rectifier input (RIB) and another for bypass input
(BIB). It also includes auxiliary contacts to report the status of the switchgear to
the UPS.
For external MBS installation instructions, see a separate manual.
©
Eaton Corporation plc 2017. All rights reserved.

Software and connectivity features

User interface

6
for additional information.

Power Management Software

Options and accessories

Maintenance Bypass Switch

6
for more information.
Revision: 005 Document ID: P-164000249
User's and installation guide
29 (126)