Table of Contents
Advertisement
Teldat S.A.
Always disconnect the device from the main power supply before installing the SIM cards.
Always disconnect the device before removing the casing to access the trays.
When inserting the SIM cards, please protect yourself against electrostatic discharges (ESD).
Do not touch the SIM cards connectors.
To access the SIM trays you need to open the upper casing of the device. To do this, you need to undo the two
screws located on the upper corners of the device's front panel and the two located on the upper corners of the rear
panel.
Location of the screws on the front of the casing
Fig. 9:
Location of the screws on the rear of the casing
Fig. 10:
2.2.1 Identifying the SIM trays
Once the upper casing has been removed, you can see the different elements inside the device.
The following image will help identify the location of the SIM trays. These are indicated by a blue circle.
Teldat H Automotive Family
2 Installation
9
Advertisement
Table of Contents
Need help?
Do you have a question about the H1 HSDPA and is the answer not in the manual?
Questions and answers