Samson 3374-10 Mounting And Operating Instructions page 8

Safety instructions and measures
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the specified hazard statements, warning and caution notes. Furthermore, the operat-
ing personnel must be familiar with the applicable health, safety and accident prevention
regulations and comply with them.
Referenced standards and regulations
The Type 3374 Electric Actuator fulfills the requirements of the Directives 2014/30/EU and
2014/35/EU. The declaration of conformity includes information about the applied confor-
mity assessment procedure. This declaration of conformity is included in the appendix of
these instructions.
The Type 3374 Electric Actuator is designed for use in low voltage installations.
Î For wiring, maintenance and repair, observe the relevant safety regulations.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions of the valve on which the electric actuator is mount-
ed, e.g. for SAMSON valves:
u EB 5861 for Type 3260 Three-way Valve
u EB 5868 for Type 3213 and Type 3214 Globe Valves
u EB 8113 for Type 3323 Three-way Valve
u EB 8131 for Type 3531 Globe Valve for Heat Transfer Oil
u EB 8135 for Type 3535 Three-way Valve for Heat Transfer Oil
8 EB 8331-4 EN