Travel - Samson 3374-10 Mounting And Operating Instructions

9.11 Travel

Limited travel range (c63)
The Limited travel range parameter determines in % how far the actuator stem can move at
the maximum. The rated travel (c61) acts as the reference. When c63 = 100.0 %, the travel
range is not limited.
Code Description
c61 Rated travel
c63 Limited travel range
Speed level (c64)
The actuator stem moves to the position determined by the input signal at the selected stroking
speed. There are two different speed levels (NORM and FAST).
The transit time (c66) is calculated from the travel and the stroking speed (c65). The transit time
is the time that the actuator stem needs to move through the adjusted travel. The following ap-
plies:
Transit time [s] =
Code Description
c64 Speed level
c62 Gear version
c65 Stroking speed
c66 Transit time
Dead band (switching range)
The dead band suppresses slight movements of the stem. The dead band represents the sum
of the positive and negative hysteresis. After the actuator has been stationary, the input sig-
nal must change by at least half of the dead band to cause the actuator to move again.
Code Description
c67 Dead band (switching range)
EB 8331-4 EN
Travel [mm]
Stroking speed [mm/s]
WE Adjustment range
[mm] Read only
u
100.0 % 10.0 to 100.0 %
WE Adjustment range
NORM NORM (normal), FAST (fast)
Read only
u
[mm/s] Read only
u
[s] Read only
u
WE Adjustment range
2.0 % 0.5 to 5.0 %
Configuration level
59