G 5xxx
Figure 020-15: Bottom Door Seal
4.5
Door Lock with Contact Switch Removal
4.5.1
Fully Integrated Models
1. Uninstall the appliance.
2. Disconnect the appliance from the power supply.
3. Remove the door outer panel (Section 030-4.3).
4. Remove the fascia panel (Section 100-4.2).
5. Remove the electronic (Section 100-4.5).
6. Separate the door lock assembly from the electronic.
4.5.2
Integrated Models
1. Uninstall the appliance.
2. Disconnect the appliance from the power supply.
3. Remove the fascia panel (Section 100-4.1).
4. Remove the T20 screw securing the top of the door lock to the door inner
panel (Figure 020-16, Item 1).
5. Remove the two T20 screws securing the sides of the door lock/electronic
mounting bracket to the door inner panel.
6. Separate the door lock/electronic mounting bracket from the door inner
panel.
7. Disconnect the Molex plug from the door lock.
8. Press down on the door lock's locking tabs using a small flathead
screwdriver (Figure 020-16, Item 2) to release the door lock from the
mounting bracket.
9. Remove the door lock from the mounting bracket.
53
Technical Information