Machine Response Following A Power Failure; Turbo Function (Select Models) - Miele G 4205 Technical Information

G 5 series futura dishwashers
Hide thumbs Also See for G 4205:
Table of Contents

Advertisement

Technical Information
the latch is completely retracted until position 1 (door closed) is reached.
Finally, the door lock is locked. (Diamond, Dimension Plus only.)
Warning!
Incognito (fully integrated) models: If for service purposes the door
switch has been bypassed and the see-through door installed, the
locking bar must be pushed back into its home position before the door
is closed. If this is not done, the hinge spring will be damaged and the
entire AutoOpen drive assembly will have to be replaced.
2.3

Machine Response Following a Power Failure

Following a power failure, a program automatically continues from the point
at which it was interrupted.
2.4

Turbo Function (Select Models)

The Turbo function can be selected by the customer under Extras.
An increase in the wash temperature (+9°F), the final rinse temperature
(+3.6°F) and the circulation pump pressure (see Section 050-2.11) can
shorten the duration of certain programs without diminishing washing and
drying performance.
Shorter times:
The shorter times resulting from the selection of Turbo vary from standard
running times by 20 to 30 percent, depending on the program.
Water consumption:
Water consumption is the same in the Light Soiling and Express programs.
In other programs such as Normal, Heavy Soil or Pots and Pans, water
consumption is even slightly reduced, because the pre-wash step is skipped.
Energy consumption:
Energy consumption increases by approximately 0.2 kilowatt-hours, as the
suds in the wash cycle, for example, are heated to a higher temperature (+9°F).
The Turbo function is activated in the Sensor Wash, Express, Light
Soiling, Normal, Heavy Soil and Pots and Pans programs.
The Turbo function is not activated in the special programs (such as
Starch/Cheese) as shortening the running times would contradict the specific
goal of the special application. It is also not activated in glassware programs
(the focus here is on the protection of glassware, and the increased wash and
rinse temperatures would contradict this) or the Economy program
(resource-saving washing is the key aspect here and the increased energy
consumption in the Turbo function would contradict this).
Note:
When the Turbo function is selected, the GlassCare LED (if applicable) does not
light up, even in programs under 122°F. With Turbo the emphasis is clearly on
speed and not on gentle treatment.
118
G 5xxx

Advertisement

Table of Contents
loading

Table of Contents