Plumbing Connections; Intake Connection; Drain Connection; Layout Of Electrical Components - Miele G 4205 Technical Information

G 5xxx
Do not cut the plug off the power supply cord/plug and connect it directly to
the house wiring under any circumstances. This voids the warranty.
For hardwiring, the power cord must be removed from the appliance by
disconnecting the cord from the terminal block located at the lower left front of
the dishwasher, behind the toekick and service panel. Feed the permanent
power supply cable through the strain relief and secure it directly to the
terminal block.
Note:
The appliance must be grounded.
3.3

Plumbing Connections

3.3.1

Intake Connection

The appliance is supplied with a 5-foot-long intake hose, equipped with a ⅜-
inch female hose connection. This hose connection can be directly connected
to a water supply valve or to an appropriate coupler/adapter (not included
with appliance).
3.3.2

Drain Connection

The appliance is equipped with a 5-foot-long drain hose with an internal
diameter of ⅞".
D

Layout of Electrical Components

1

Control Panels

Miele Futura dishwashers are categorized into three (3) product series, based
on the type of controls.
1.1

Touchtronic

This series of Miele dishwashers is operated by pushing a single button – no
separate temperature or drying selections – just turn the machine on, select a
program and Miele does the rest. All models include a diverse group of wash
programs for multiple cleaning needs. Models are designed to maximize
cleaning results and optimize water and energy conservation.

Figure D-1: Touchtronic Fascia Panel (G 5505/G 5705 Shown)

19
Technical Information