Removing Egs Valve Y5; Removing Reactivation Valve Y38; Heater Relay Removal; Salt Container And Salt Container Reed Switch Removal - Miele G 4205 Technical Information

G 5 series futura dishwashers
Hide thumbs Also See for G 4205:
Table of Contents

Advertisement

G 5xxx
2. Disconnect the appliance from the power supply.
3. Remove the left side panel (Section 010-4.1).
4. Disconnect the wiring harness from the flow meter circuit board.
5. Release the circuit board retaining tab and slide the board out of the
water diverter.
4.8

Removing EGS Valve Y5

1. Uninstall the appliance.
2. Disconnect the appliance from the power supply.
3. Remove the left side panel (see Section 010-4.1).
4. Tip the appliance onto its back.
5. Remove the drip pan. See Section 010-4.2.
6. Remove the connecting strip. See Section 030-4.5.
7. Remove the left multi-plinth. See Section 040-4.3.
8. Disconnect the wiring harness from the EGS valve.
9. Using a small flathead screwdriver, push the locking clip away from the
valve.
10. Pull the EGS valve up and out of the water diverter.
4.9

Removing Reactivation Valve Y38

1. Uninstall the appliance.
2. Disconnect the appliance from the power supply.
3. Remove the left side panel (see Section 010-4.1).
4. Tip the appliance onto its back.
5. Remove the drip pan. See Section 010-4.2.
6. Remove the connecting strip. See Section 030-4.5.
7. Remove the left multi-plinth. See Section 040-4.3.
8. Disconnect the wiring harness from the reactivation valve.
9. Turn the reactivation valve 90° (1/4 turn) clockwise.
10. Pull the reactivation valve up and out of the resin chamber.
4.10

Heater Relay Removal

1. Uninstall the appliance.
2. Disconnect the appliance from the power supply.
3. Remove the drip pan (Section 010-4.2).
4. Disconnect all electrical connections from the heater relay.
5. Release and remove the heater relay from the water diverter.
4.11

Salt Container and Salt Container Reed Switch Removal

1. Uninstall the appliance.
2. Disconnect the appliance from the power supply.
3. Open the door.
4. Remove the bottom basket.
5. Unscrew the salt container cap.
6. Remove the seal.
7. Empty the salt container.
97
Technical Information

Advertisement

Table of Contents
loading

Table of Contents