Brilliantlight Deactivation; Figure 010-4: Front Hinge Retaining Screw; Figure 010-5: Side Hinge Retaining Screw - Miele G 4205 Technical Information

Technical Information
9. Disconnect the ground wire from the inner door panel.
10. Remove the cable clip from its guide on the inner door panel.
11. Unhook the door and lay it on a mat.
12. Remove the bottom door seal.
13. Remove the T20 screw securing each hinge to the front of the inner door
panel (see Figure 010-4, Item 1).

Figure 010-4: Front Hinge Retaining Screw

14. Remove the two T20 screws securing each hinge to the side of the inner door
panel (see Figure 010-5, Item 1).
Figure 010-5: Side Hinge Retaining Screws
15. Remove each hinge from the door.
4.4

BrilliantLight Deactivation

Note: With the door open, the interior light is switched off automatically after
15 minutes.
In order to permanently deactivate the interior light, half-open the dishwasher
door and quickly partially close and open it three times. The door must be
36
G 5xxx