Filter Combination Assembly (With Locking Piece); Figure 050-24: Combination Filter Locking Clip (Unlocked) - Miele G 4205 Technical Information

Technical Information
4.25

Filter Combination Assembly (with Locking Piece)

Note: During assembly, the dishwasher is used as a guide.
1. Disconnect the appliance from the power supply.
2. Install the microfine filter in the sump. Ensure that the lug is positioned
towards the rear of the machine.
3. Turn the microfine filter clockwise as far as possible; see Figure 050-22.
4. Install the large surface area fine filter in position.
5. Press the large surface area fine filter downwards; see Figure 050-23, Item 1.
6. Install the handle (crown coarse filter) and turn it clockwise as far as
possible; see Figure 050-23, Item 2.
7. Carry out a visual check: The handle (crown coarse filter) should be
parallel to the door as shown in Figure 050-23.
8. Remove the filter combination.
9. Open the filter cap.
10. Install the locking piece, mat. no. 06248730, to prevent the retaining clip
spring from opening; see Figures 050-24 and 050-25.

Figure 050-24: Combination Filter Locking Clip (Unlocked)

108
G 5xxx