Table of Contents
Advertisement
Maintenance
•
Place a collecting container with +1700
cm³ (103.74 cu.in) capacity under the
drainage plug «3».
•
Unscrew and remove the oil drainage
plug «3» and then drain all the engine
oil into the collecting container.
•
Fit a new engine oil cartridge filter and
take special care to lubricate the filter
sealing O-rings with oil.
•
Screw and tighten the engine oil drain-
age plug «3» to the prescribed torque.
Locking torques (N*m)
Engine oil drainage plug 24 ÷ 30
•
Pour the indicated quantity of recommended transmission oil through the fill opening.
Recommended products
AGIP CITY HI TEC 4T Engine oil
API SL, ACEA A3, JASO MA
Characteristic
Engine oil
1700 cm³ (103.74 cu.in).
•
Screw and tighten the measuring cap-
dipstick «1».
•
Start the engine and let it run for sev-
eral minutes. Stop the engine and let it
cool down.
•
Check engine oil level again.
CAUTION
IF OIL IS CHANGED AT THE SAME TIME THE
ENGINE OIL CARTRIDGE FILTER IS RE-
PLACED, ADD APPROXIMATELY 1700 cm³ OF
OIL.
IF THE OIL IS CHANGED BUT THE ENGINE OIL
CARTRIDGE FILTER IS NOT REPLACED, ADD
APPROXIMATELY 1500 cm³ OF OIL, INSTEAD
OF 1700 cm³, SINCE PART OF THE LUBRICA-
TION CIRCUIT IS STILL FILLED.
MAIN - 50
SCARABEO 500
Hide quick links:
Advertisement
Table of Contents
