APRILIA SCARABEO 500 2008 Service Station Manual page 202

Engine
Replacing the countershaft bearings
- Check that the bearings are free from irregular
noise or clearance. Otherwise, replace them.
Flywheel-side crankcase half
- Remove the internal Seeger ring.
- Turn the crankcase half over.
- Remove the bearing from the flywheel-side
crankcase half using the specific tool and a mallet.
Specific tooling
020376Y Adaptor handle
020358Y 37 x 40 mm adaptor
020439Y 17-mm guide
- Remove the bearing from the transmission-side
crankcase half using the specific tool.
Specific tooling
001467Y008 Pliers to extract Ø 17-mm bear-
ings
001467Y007 Driver for bearings with OD 54 mm
- Before fitting a new bearing, heat the flywheel-
side crankcase half using the specific tool.
- Place the crankcase half on a wooden base.
Specific tooling
020151Y Air heater
020150Y Air heater support
ENG - 202
SCARABEO 500