APRILIA SCARABEO 500 2008 Service Station Manual page 158

Engine
- Align the two holes on the flywheel with the seat
on the crankcase so that the specific tool can be
placed.
- Tighten the bushing which is part of the flywheel
locking tool on the extractor thread.
- Fit the specific tool as shown in the figure, making
sure that the pins are perfectly inserted into the
previously aligned holes and that they are fitted
fully to the end and almost flush with the flywheel.
Specific tooling
020472Y Flywheel lock wrench
- Unscrew the magneto flywheel fixing nut.
- Remove the specific tool and the fixing nut.
ENG - 158
SCARABEO 500