APRILIA SCARABEO 500 2008 Service Station Manual page 25

SCARABEO 500
Oil scraper ring: Standard coupling clear-
ance: 0.01÷0.06 mm
Maximum clearances allowed after use: 0.10
mm
If clearances measured exceed the maximum val-
ues specified in the table, the piston should be
replaced with a new one.
Crankcase - crankshaft - connecting rod
Crankshaft bearing diameter.
Measure the bearings on both axes, X-Y
Specification
Cat. 1
Cat. 2
Crankshaft alignment
Specific tooling
020335Y Dial gauge magnetic support
Specification
CRANKSHAFT
MAXIMUM OFF-LINE ALLOWED
A =
B =
C =
D =
Desc./Quantity
Standard diameter: 40.010 ÷ 40.016
Standard diameter: 40.016 ÷ 40.022
Desc./Quantity
0.15 mm
0.010 mm
0.010 mm
0.10 mm
Characteristics
CHAR - 25