APRILIA SCARABEO 500 2008 Service Station Manual page 285

SCARABEO 500
•
Remove the brake calliper.
•
Undo the two screws indicated.
•
Push the floating pad of the calliper.
•
Remove the brake pads.
CAUTION
AFTER REMOVING THE PADS, DO NOT OP-
ERATE THE BRAKE CONTROL LEVER; OTH-
ERWISE, THE CALLIPER PLUNGER COULD
GO OUT OF ITS SEAT RESULTING IN BRAKE
FLUID LEAKAGE.
•
Check the thickness of the friction ma-
terial. Replace if the thickness is below
the minimum value.
Characteristic
Minimum thickness of the friction material
1.5
Braking system
BRAK SYS - 285