APRILIA SCARABEO 500 2008 Service Station Manual page 225

SCARABEO 500
Engine
- Clean thoroughly all the parts before removing
them.
- Place the extractor complete with pin on the static
part of the ceramic seal.
- Without modifying the extractor position, make
three holes on the static part of the seal using the
pin supplied and a hammer.
NOTE
MAKE THE HOLES WITH A STRONG HIT.
MULTIPLE BLOWS COULD DEFORM THE
PART WITHOUT PASSING THROUGH.
- Fasten the extractor to the static part of the seal-
ing, using the screws supplied with the tool.
CAUTION
FASTEN IT CORRECTLY WITHOUT "TEAR-
ING" THE PLATE
- Complete the tool by fitting the bracket, screw
and the nut.
ENG - 225