System Parameters: Terminal Clock; System Parameters: Running Time Meter; System Parameters: Message System; System Parameters: Variant Buffer - Omron NT4S Operation Manual

Standard Mode

4.12.3 System Parameters: Terminal Clock

4.12.4 System Parameters: Running Time Meter

4.12.5 System Parameters: Message System

4.12.6 System Parameters: Variant Buffer

4.12.7 System Parameters: Password Management

4.12.8 System Parameters: Printer Interface

160
System parameters that can be specified for the terminal clock are the symbolic
addresses of the variable, the polling time, the transfer parameters (date, time of
day, day of week) and the variables for setting the terminal clock from the controller
end.
System parameters that can be specified for the running time meter are the ad-
dresses for the control byte and reset byte as well as the polling time.
System parameters that can be specified for the message system are the general
parameters. These include the size of the message buffer and the message priority
for direct display of a message.
Parameters that can additionally be specified for the serial message system are the
parameters for the logging printer and the symbolic name of the variable which can
be used to delete messages from within the controller.
Parameters that can be defined for the parallel message system are the size of the
message buffer, the polling time and the symbolic name of the variable address.
Additional parameters for the serial and parallel message system are the sorting
criteria and how the messages are to be displayed.
System parameters available for the variant buffer are the symbolic name of the
variable and the size of the variant buffer.
System parameters that can be defined for the password management are the
passwords themselves, the corresponding authorization levels and the initializa-
tion values for the authorization levels.
Parameters that are specified for the printer interface are the baud rate, parity, data
bits, stop bits and the handshake.
Section 4-12