Omron NT4S Operation Manual page 114

Standard Mode
100
TabLeft
In tables, this system variable can be used to shift to the column on the left.
Data type:
Editor:
Output:
Possible values:
TabRight
In tables, this system variable can be used to shift to the column on the right.
Data type:
Editor:
Output:
Possible values:
TabPgUp
This system variable enables soft keys to be used in tables to shift from page to
page (in an upward direction).
Data type:
Editor:
Output:
Possible values:
TabPgDn
This system variable enables soft keys to be used in tables to shift from page to
page (in a downward direction).
Data type:
Editor:
Output:
Possible values:
Shift
When the system variable is set, alphanumerical characters can be entered. When
the keys on the numerical keypad are pressed, the associated alphabetical letters
are automatically provided. By pressing repeatedly, you can proceed through the
associated letters. Only uppercase letters are provided.
Data type:
Editor:
Output:
Possible values:
Numeric
Soft key, function key
---
(0) Initial state
(1) To the left by one column
Numeric
Soft key, function key
---
(0) Initial state
(1) To the right by one column
Numeric
Soft key, function key
---
(0) Initial state
(1) Move up one page
Numeric
Soft key, function key
---
(0) Initial state
(1) Move down one page
Numeric
Soft key, function key
---
(0) Initial state, numbers only
(1) Shift mode 1 active, uppercase letters
Section 4-6