Serial Message System - Omron NT4S Operation Manual

Standard Mode
4.6.3.6

Serial Message System

RTCYear
This variable is used to display and set the year.
Data type:
Editor:
Output:
Possible values:
RTCDayofWeek
This variable is used to display and determine the day of the week. The variable
assumes the values 0 to 6. This is a modulo counter. A coded text should be used
for the display. The assignment and starting point can be specified as needed.
Data type:
Editor:
Output:
Possible values:
RTCDateFmt
Is used to enter the format according to which the date is to appear in displayed
messages.
Data type:
Editor:
Output:
Possible values:
RTCYear2000
This variable is used to display and set the year in a 4-digit format.
Data type:
Editor:
Output:
Possible values:
RepmanSortCrit
Is used to enter the sorting criterion for the serial message output.
Data type:
Editor:
Output:
Possible values:
Positive decimal number
Positive decimal number
Positive decimal number
0 to 99 (only the year and the decade are influenced)
Positive decimal number
Selection text
Selection text
0 to 6
Numeric
Selection text , positive decimal number
---
(0) European DD MM YY
(1) US MM DD YY
(2) JAPAN JJ MM DD
Numeric
Selection text , selection image, alphanumeric, deci-
mal
---
0 to 9999
Numeric
Selection text , positive decimal number
---
(0) By priority of message number
(1) By time of arrival (newest first)
(2) By time of arrival (oldest first)
Section 4-6
93