Omron NT4S Operation Manual page 111

Standard Mode
RepoutAnzYearP
Determines the number of digits that is to be used to represent the year.
Data type:
Editor:
Output:
Possible values:
RepoutRepTextP
The terminal uses this variable to display the most current message of the parallel
message system.
Data type:
Editor:
Output:
Possible values:
RepoutRepTextP21
Is used to display the most current message of the parallel message system - from
the 21st digit with a variable length (20, 40 or 60). The message is displayed in the
same way as it would appear in the message mask, i.e. in accordance with the
selected message parameters.
Data type:
Editor:
Output:
Possible values:
RepoutRepTextP41
Is used to display the most current message of the parallel message system - from
the 41st digit with a variable length (40 or 60). The message is displayed in the
same way as it would appear in the message mask, i.e. in accordance with the
selected message parameters.
Data type:
Editor:
Output:
Possible values:
RepoutRepTextP61
Is used to display the most current message of the parallel message system - from
the 61st digit. The last 20 characters of a message are displayed. The message is
displayed in the same way as it would appear in the message mask, i.e. in accord-
ance with the selected message parameters.
Data type:
Editor:
Output:
Possible values:
Numeric
Selection text , selection image, alphanumeric, binary,
decimal, hexadecimal
---
(0) year represented by 2 digits
(1) year represented by 4 digits
Alphanumeric
---
Alphanumeric
Any
Alphanumeric
---
Alphanumeric
Any
Alphanumeric
---
Alphanumeric
Any
Alphanumeric
---
Alphanumeric
Any
Section 4-6
97