Omron NT4S Operation Manual page 105

Standard Mode
ComParityB
Determines the creation of and check method for the parity bit for SER2.
Data type:
Editor:
Output:
Possible values:
ComStopBitsB
Defines the number of stop bits on SER2.
Data type:
Editor:
Output:
Possible values:
ComBaudrateB
Defines the baud rate on SER2.
Data type:
Editor:
Output:
Possible values:
ComHandshakeB
Specifies the type of handshake on SER2.
Data type:
Editor:
Output:
Possible values:
ComDefaultB
This variable can be used to program new parameters for SER2.
Numeric
Selection text , positive decimal number
---
(0) No parity
(1) Odd parity
(2) Even parity
Numeric
Selection text , positive decimal number
---
(0) 1 bit
(1) 1.5 bits
(2) 2 bits
Numeric
Selection text , positive decimal number
---
(0) 300 Bd
(1) 600 Bd
(2) 1200 Bd
(3) 2400 Bd
(4) 4800 Bd
(5) 9600 Bd
(6) 19200 Bd
(7) 38400 Bd
(8) 57600 Bd
Numeric
Selection text , positive decimal number
---
(0) No handshake
(1) RTS/CTS hardware handshake
(2) XON/XOFF software handshake
Section 4-6
91