Keyboard; Nt18S-Sf121B-E - Omron NT4S Operation Manual

The Terminals of the NT-Series
1.1.5

NT18S-SF121B-E

1.2

Keyboard

8
1 Front Panel
2 Front Cover
3 Display
4 Status-LED Key Data Release
5 Key Data Release
6 Key Plus
7 Key Minus
8 Key Enter
9 Key Clear
The terminals NT4S-SF121B-E, NT4S-SF123B-E and NT18S-SF121B-E are
equipped with a keyboard made of short-stroke keys. The stroke length is approxi-
mately 0.5 mm.
The terminals NT4S-SF122B-E and NT15S-SF121B-E are equipped with a key-
board made of membrane keys. The stroke length is approximately 0.3 mm.
The key area of each key is 16 × 16 mm. The keys are covered by an embossed
polyester sheet which is resistant to environmental effects. These combinations
allows a sensitive use of the keys.
The status-LEDs of the function keys illuminate green. In transparent mode the
keys supply a fixed start and stop code. In standard mode, the function of the keys
is as defined in the application.
10 Key Dot
11 Status-LED Key Help
12 Key Help
13 Key Cursor Home
14 Key Cursor Right, Left, Up, Down
15 Keys 0 to 9
16 Status-LED Function Key (F6)
17 Function Key (F6)
Section 1-1