Trace Control Tools; Data Saving; Searching For A File - EDAN F6 User Manual

F Series Fetal & Maternal Monitor User Manual

8.2 Trace Control Tools

1
3

8.2.1 Data Saving

When the START key is pressed, the monitor saves data of the previous ID in a file, and then
clears it from the main interface. The main interface only displays the new patient's data. During
monitoring, the data is saved every 10 minutes. All data of the same patient is saved in a file (the
maximum duration is 24 hours, the rest data is saved in another file.)
The files are stored in the monitor. When the data amount reaches the maximum capacity (300
files or approximately 60-hour), the monitor deletes the oldest file(s) automatically.

8.2.2 *Searching for a File

The searching key
in the monitor.
To search for a patient,
1 Select the searching key to open the file list. It contains six sets of most recent patient's ID,
name and start time of monitoring. Select the required item, this file is loaded to the main
interface immediately.
1
Figure 8-2 Trace Control Tools
Searching Key
Alarm Reviewing Key
under the traces is used to search for a patient's data file saved
Figure 8-3 File List
2
2 Reviewing Keys
4 CTG Analyzing Key
- 75 -
Fetal Monitoring Display
3 4