Start Monitoring; Inputting Maternal Information (Mat. Info); Auto Id; Changing Maternal Information - EDAN F6 User Manual

F Series Fetal & Maternal Monitor User Manual

7.8 *Start Monitoring

After the START key is pressed, the monitor automatically zeroes the pressure, clears the MFM
count and starts monitoring.
If the Auto Printing is disabled, press the PRINT key to start printing.

7.9 *Inputting Maternal Information (Mat. Info)

7.9.1 Auto ID

After you press the START key, the system creates an auto-ID for the present patient. (if Mat.
Info inputting is switched off.) The auto-ID consists of the date and time when the monitoring
starts.

7.9.2 Changing Maternal Information

You can change the patient's information after the monitoring starts:
1 Select Mat. Info key
2 Select ID.
3 Select the required character for patient's ID on the soft keyboard.
4 Select Enter.
5 Select Name.
6 Select the required letter for patient's name on the soft keyboard.
7 Select Enter.
8 Select OK.
on the main interface.
Figure 7-14 Mat. Info Inputting Menu
Figure 7-15 Soft Keyboard
- 71 -
Fetal Monitoring