Disinfecting - EDAN F6 User Manual

F Series Fetal & Maternal Monitor User Manual
1 Do not squeeze the rubber tube on the cuff.
2 Do not dry-clean the cuff.
3 Only clean the outer surface of the connectors, make sure no liquid goes into the
connector.
4 When the reusable cuff is not connected with the monitor, or being cleaned, always
place the cover on the rubber tube to avoid liquid permeation.

13.3 Disinfecting

To disinfect the transducers and leads, follow these steps:
1) Clean the accessories.
2) Wipe them with a soft cloth dampened in the recommended disinfectant.
3) Wipe them clean with a soft cloth dampened in water.
4) Air-dry them or wipe the remaining moisture with a soft dry cloth.
The table below lists the allowed disinfectant bases:
Type
Fetal/Maternal Monitor
Base Station
US and TOCO Transducers
(the wired and wireless)
Remote Event Marker
DECG Cable
IUP Cable
ECG Leads
SpO Transducer
2
TEMP Transducer
NIBP Cuff
NIBP Cuff Extension Tube
CAUTION
Recommended
Ethanol 75%
Isopropanol 70%
Ethanol 75%
Isopropanol 70%
- 135 -
Maintenance and Cleaning