Main Menu Display (Explanation Of Screens And Commands) - JRC JUE-87 Instruction Manual

Inmarsat-c mobile earth station (egc receiver)
Hide thumbs Also See for JUE-87:
Table of Contents

Advertisement

3.1.2 Main Menu display (explanation of screens and commands)

(1)
Tune
Rec (POR):
Position: N 50°00'
Transmit
read-Out
(2)
Transmit
(3)
read-Out
Edit
call-Log
Distress
Ncs/les-info
receive-Mode
egC
Move the cursor to the item you want with  ,  keys then press <ENTER>, or
(4)
hold down the <Alt> key and press any capital character.
<Explanation of screens>
The Main menu screen is the starting screen to select the main function and is divided into the following
areas:
(1) MES status area (Upper two lines) : Gives the MES status, current date, time, and MES position.
(as set under DOS or Setup command)
(2) Main menu area : Gives a list of function you use routinely. Available items on this model are
[Nes/les-info] to initial setting, [egC] to EGC reception, and [read-Out] to read out received message,
only.
(3) Window area : Gives further instruction and/or submenu. Available items on this model are
[Nes/les-info] to initial setting, [egC] to EGC reception, and [read-Out] to read out received message,
only.
(4) Instruction area (Lower two lines) : Gives instruction at the state where you were.
<Explanation of commands>
JUE-87 has two kinds of way to operate the DTE, one is selecting command by cursor, and the other one
is pressing the buttons directory. Direct commands make quicker and easy operation when you get used to
the operation of DTE.
(1) Commands selecting by cursor
You can select the function below in the Main menu by moving the cursor to the item you want and
pressing
key. Available items on this model are [Nes/les-info] to initial setting, [egC] to EGC
Enter
reception, and [read-Out] to read out received message, only.
Good-15
E 123°00'
Edit
call-Log
: To transmit message.
: To read out received message.
: To edit a message or to manipulate files.
: To display the call-history.
: To initiate a distress alert.
: To display or register NCS/LES information.
: To select receive mode, INMARSAT-C or EGC receive only.
: To select EGC service type.
Fig 3.1.2a Main Manu Screen
Course: 123deg
Speed: 10.0kt
Distress
Ncs/les-info
3-2
15 APR,14 19:01(UTC)
at 19:00(UTC)
receive-Mode
egC

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inmarsat-c jue-87

Table of Contents