Cautions For Use - JRC JUE-87 Instruction Manual

A2.1 Cautions for Use
Don't touch immediately after printing as the printing head is still very hot.

To set the ribbon, pay attention not to twist the ribbon.

To turn on the power again after once turned OFF, wait at least 2 seconds. If this is not respected,

initialization may become wrong.
Do not install in humid or dusty place or place exposed to direct sunshine.

Don't print without ribbon cassette and paper.

Set the printer on desk or table installed evenly and stably.

When the printer is working, its mechanism is working with rather strong force, pay attention not

to approach your accessories, necktie, etc. worn on you. Those may be caught.
Don't put anything on the printer. If anything is dropped in the machine, at first turn OFF the

power, then remove dropped thing carefully.
Don't wet the printer. If water etc. is fallen, turn OFF immediately the power, and wipe off liquid.

And wait until the printer becomes completely dry to turn ON again.