Initial Setting - JRC JUE-87 Instruction Manual

3.1.3 Initial Setting

After turn on the JUE-87 MES, set the following parameters;
(1) Selecting Preferred Ocean Region
(2) Setting Date & Time
(1) Selecting Preferred Ocean Region (Ncs/Les info)
When your ship navigates in more than one ocean region, confirm "All ocean region" is selected in
"Preferred Ocean Region" window.
When a particular ocean region is selected, the MES will scan the NCS common channel only in the
ocean region selected.
1) The Selecting Preferred Ocean Region command is available, when the first line of the screen is
displayed "Log-out" or "EGC only".
2) In case of "All ocean region" setup, if MES does not receive NCS common channel more than
30minutes, MES automatically scans all ocean region and tunes new NCS common channel.
(The information is displayed on IME screen to user.)
Step Operation/Response (Example)
1
･Move the cursor to
"Ncs/les-info" with using
the arrow keys and press
key.
Enter
2
･Move the cursor to
"Preferred ocean region"
and press
Enter
3
･Confirm the cursor is at
"All ocean region" and
press key.
Enter
4
･To return to Main menu
screen, press F10 key twice
of press
Esc
(factory default
･The "Ncs/les
･The "Preferred
key.
･Status display is
･Windows are
key once.
is "All ocean region")
NOTE
Screen (Example)
information"
window is displayed.
ocean region"
window is displayed.
changed to "Scan".
disappeared.
3-4
Remarks
･When you want to change a parameter,
move the cursor to the item you want
and press key.
Enter
･You cannot set up when the status in
the first line on the main menu is
"Tune".