Hardware Setup
Hardware setup includes:
Antenna Installation: connecting the antenna to the router
Physical Placement: how and where you physically place your router
Electrical Connection: how to connect the power cord
Antenna Installation
When shipped, the antenna for the HH1620 is not connected to the router. To attach the
antenna to the router:
1.
Locate the antenna port on the back of the router (the threaded knob).
2.
Screw the antenna connector clockwise on to the threaded knob until firmly seated. Do
not over-tighten.
Physical Placement
1.
Place the router in the desired location and follow the procedures below for connecting
and configuring the router.
2 .
Follow the installation procedures for connecting and configuring the router.
HH1620 Wireless VoIP Gateway
User's Guide
15
Troubleshooting