Table of Contents
Advertisement
panel.
11.
Plug the other end into an AC power outlet.
Th turns on your voice gateway. The HH1620 does not have an On/Off power switch. The Pow
is
light on the front panel performs a series of blinks as described in
should not unplug your voice gateway when it is not in use.
IMPORTANT:
Before you continue, be sure to allow enough time for your voice gateway to
complete its start-up process. HH1620 startup is complete when the Power light on its front panel
lights solid green. This usually takes a few
We recommend plugging the HH1620 power adapter into an electrical outlet that is grounded and
equipped with a surge protector or UPS.
12.
Turn on
your computer. The Ethernet 1 light on the HH1620 front panel should light.
IMPORTANT:
Before you continue, be sure the HH1620 Power, Ethernet 1, and Interne
all on.
13.
On your computer, open a Web browser such as Microsoft Internet Explorer, Netscap
Navigator®, or Mozilla Firefox®.
14.
Check your Internet connection by visiting any webs
If your Internet connection does not work, see
If your Internet connection works, go to
B
Installation With a Standard Modem
1
.
Shut down your computer properly. Follow the instructions provided with the computer.
2.
Unplug your cable or DSL modem power cord or adapter.
3.
Disconnect any cables connecting your computer to the modem. Please leave your
modem connecte
d to the cable or phone line that provides your Internet connection.
HH1620 Wireless VoIP Gateway
User's Guide
minutes.
ite.
"Tro
ubleshooting"
on page 66.
C "Connecting Your Telephone"
5
Overview
"Front Panel"
on page 3. You
t lights are
e
on page 12.
er
Advertisement
Table of Contents
