Motorola HH1620 User Manual page 19

Feature
Power Connector for a 12 V adapter that you plug into an AC power outlet
Reset Resets your router or resets the router to the default login settings.
Button
If the router experiences trouble connecting to the Internet, briefly press and
release the Reset button to reset the router. This retains the router's
configuration information.
To reset the router to the factory defaults, press and hold the Reset button for
more than five seconds. This clears the HH1620's Username, Password, IP
Address, Subnet Mask and Operation Mode.
LAN 1,2,3 These three ports connect the router to your LAN or home network using
Ethernet cables. This enables communication among clients, such as PCs or
print servers, on the network. The LAN ports support either 10-BASE-T or 100-
BASE-T transmission speeds as well as straight-through and crossover
Ethernet cables.
Any of these three ports can also serve as an uplink port to other network
devices, such as another router or switch, which allows you to extend your
network.
WAN This port serves as an uplink port to other network devices, such as router or
switch, which allows you to extend your network.
TEL1, 2 Connect your HH1620 to the standard analog telephone(s) using this port with
your supplied RJ-11 cables.
This enables your HH1620 to make calls via the Internet.
ADSL Connect your HH1620 to the ADSL wall outlet using this port with your supplied
RJ-11 cable.
This enables your HH1620 to access the Internet.
USB This port connects the router to your computer using USB cables.
Printer Port This port connects the router to printer using a USB cable. This feature is used
to share the printer on the network.
The antenna is used for wireless connections. You are able to rotate the
Antenna
antenna to gain the best signal reception.
HH1620 Wireless VoIP Gateway
User's Guide
Description
12
Overview