Epson SC-F9300 series User Manual page 98

SC-F9300 Series User's Guide
Item
Head Movement
Multi Strike Printing
Feed Speed Limiter
Pressure Roller Load
Remove Skew
Using the Control Panel Menu
Parameter Explanation
* Choose the range in which the print head moves during printing.
Data Width
Data Width: The print heads move within the range of the print data's
Printer Full Width
width. Restricting the extent of the print heads' movement increases
print speed.
Media width
Printer Full Width: The print heads move within the range of the
printer's maximum media width. Select this option for more even print
results with less variation.
Media Width: The print heads move within the range of the width of
the media that is loaded.
* Choose the number of times each line is printed.
Off
To carry out high-density printing using Backlit Film, increase the
2 to 8
frequency.
On Off is recommended in normal circumstances.
Set this to On if media sticks or wrinkles, or tears easily when printing
*
Off
on thin media.
When this is set to On, print speed slows down.
Low If the following occurs when printing, you may be able to avoid it by
changing to a load that reduces the pressure on the rollers (for
*
example: Medium to Light).
Medium
❏
When there is wrinkling around the pressure rollers.
High
❏
When there are stains due to head striking.
❏
When stains on the roller stick to the media.
*
Select whether or not (On or Off) to perform skew correction for media
On
loaded in the printer. The default setting of On is recommended in
Off most situations. Set this to Off if the media shows traces from the rollers
due to skew corrections.
98